Start prounu
The body of the rocket is designed from several parts of the steel structure which are connected together by screws. The precise positioning of the parts will be ensured by pins and prepared pockets. The surface of the object will be designed by cladding with facade laminate in the desired color without visible assembly elements, we will only respect the maximum possible size of the material and expansion joints for the movement of the metal structure due to the weather. The edges of the rocket will be designed by setting off at 45°.
Launch of the rocket, located in the Rustonka area in Prague
The entire rocket will be held above the ground by four struts welded from metal pipes and profiles that are supposed to imitate a launch pad. The surface of the structure will be treated in a powder coating shop, as will the internal structure of the rocket. These structures supporting the rocket object will be set into concrete bases in which stainless steel threaded rods – anchors are installed.
Start of the Proun, 2014, ink on paper.
Launch of the rocket, location in the Rustonka area in Prague
The concrete blocks will need to be fitted with integrated lamps that will illuminate the rocket itself through the structure. It is also necessary to count on an electric source for the rocket engine in which a salt halogen will be installed. The supply will be solved through one of the struts in the cavity of the structure, the outlet must be prepared on a concrete base.
White version of the proun
The installation of the work on site will require the assistance of a crane and a high-lift platform. The installation will take place within three to five days.
The production of the object with trial completion will be carried out within 1⁄2 year.
The transport of the work from the place of implementation to the place of installation will be by conventional freight transport.
